High-quality heavy-duty folding table support with soft-close damper EB-303-DA-BL made of stainless steel, black finish. Folding console with a load capacity of up to 100 kg. Folding support from ROCA / Sugatsune

High-quality heavy-duty folding console with damper made of stainless steel, with a load capacity of up to 100 kg, surface: black

Application: These high-quality folding table supports made of solid stainless steel are ideal for humid and harsh environments and can be used in a variety of ways. The folding consoles can be used in homes, offices, restaurants, hotels, etc. One of the possible applications is the work surface extension in the kitchen or table extension. [caption id="attachment_31826" align="alignnone" width="420"] High-quality dampened folding console EB-303-DA-BL made of stainless steel, with a load capacity of up to 100 kg, finish: black. Application: Folding table[/caption] They can also be perfectly used for the interior design of motorhomes, caravans, boats, yachts and trains. The flap supports are designed for tough environments, but thanks to their classic industrial look they are also perfect for modern interiors. [caption id="attachment_31839" align="alignnone" width="420"] High-quality folding consoles with soft-close mechanism EB-303-DA-BL made of stainless steel, with a load capacity of up to 100 kg, black finish. For use in a living room.[/caption] These EB-303-DA folding table holders are also very suitable for use in tiny houses or micro apartments, allowing you to flexibly organize space as needed. A special feature of these folding angles is that the flap support and flap hinge are combined in one fitting. [caption id="attachment_32229" align="alignnone" width="419"] High-quality folding consoles with soft-close mechanism EB-303-DA-BL made of stainless steel with a load capacity of up to 100 kg, black finish. Application, open and closed position[/caption] The built-in soft-close damper ensures that the flap closes gently. For lighter flaps, a flap support without a damper can be installed. When the flap is folded, it can be locked in place by pressing on the surface. This ensures that the folding table in your caravan or boat remains closed even while driving, without wobbling or making any noise. When the folding table holder is opened, it automatically locks in the upper position and can be loaded. [caption id="attachment_31851" align="alignnone" width="420"] High-quality folding consoles with soft-close mechanism EB-303-DA-BL made of stainless steel, with a load capacity of up to 100 kg, black finish. Use[/caption] To fold the folding table back up, both levers on the left and right must be operated simultaneously. This ensures that the folding support is not accidentally folded. The release lever of the folding angles is extra long to make it easier to grip. The folding consoles are made of corrosion-resistant stainless steel. The surfaces are elaborately finished, giving the fittings a very high-quality appearance. Assembly: [caption id="attachment_31911" align="alignnone" width="420"] High-quality folding consoles with soft-close mechanism EB-303-DA-BL made of stainless steel, finish: black. Installed in the kitchen as an extension of the work surface.[/caption] The assembly is done with screws. The maximum load can be achieved by distributing the load so that the center of gravity is in the middle ( see picture ). If the center of gravity of the flap is on the edge of the folding table holder, the load capacity is 75 kg. [caption id="attachment_31863" align="alignnone" width="420"] High-quality folding consoles with soft-close mechanism EB-303-DA-BL made of stainless steel, surface: black. The load capacity depends on the position of the center of gravity.[/caption] Attention: the wall must be suitable to bear the required load. The back of the folding brackets is rounded so that they can be mounted not only on flat surfaces but also on tubes (Ø25 mm). The picture below shows when one and when two dampers are needed. [caption id="attachment_32217" align="alignnone" width="420"] Two EB-303-DA-BL flap supports with soft-close dampers or one EB-303-DA-BL and one EB-303-BL without dampers can be installed.[/caption] If the flap is narrow, the flap table holders can alternatively be mounted upside down. In this case, the longer side is mounted on the wall and the shorter side is used for the folding table or shelf. This has no negative impact on the load capacity ( see picture ). [caption id="attachment_31875" align="alignnone" width="420"] High-quality folding consoles with soft-close mechanism EB-303-DA-BL made of stainless steel, black finish. Reverse mounting for narrow flaps.[/caption] Characteristics:

• Load capacity in the middle: 495 N (50 kp) for 1 folding angle
• Torque: 230 Nm
• Weight: 500 g
• Longer trigger lever
• Ambient temperature: from -30 °C to +120 °C
• Endurance test: 50,000 cycles passed

Included in delivery:

• 1 piece folding table support made of stainless steel

Material:

• Made of high-quality stainless steel SUS304 (AISI304, V2A)

Surface:

• Stainless steel, black coated
• Also available with the surface stainless steel uncoated

Dimensions:

• Length: 307 mm
• Height: 165 mm
• Width: 29 mm
• Radius rear wall: Ø25 mm

For dimensions see technical drawing (mm) : [caption id="attachment_32157" align="alignnone" width="421"] Technical drawing: High-quality folding consoles with soft-close EB-303-DA-BL made of stainless steel, surface: black[/caption] Watch product video: Manufacturer reference number:

Stainless steel, surface: black	120-049-237 917260	EB-303-DA-BL
EAN code	4510932225908

Manufacturer: ROCA Industry (Sweden) Distribution partner: SUGATSUNE / LAMP® (Japan)